With a CSA & EASA certified repair/modification facility in Edmonton, we offer various services as follows:

• Most motor & pump repairs and refurbishing
• On-site and in-house troubleshooting
• Applications specific modifications
• Vibration analysis
• Instrumentation installations
• XP mods and repairs
• Recip compressor spciatly mods and data retrival
• Accessory re-design and custom build
• Field Services

Special Service Supply and Modification Examples:

Encana, Inga Site (BC) / Enerflux, Lakusta reciprocating compressor application. We imported a new stocked 60hp, 1200rpm, 4160V, WPII, Teco Motor and performed the following modifications:

• Replaced the shaft with 4140 steel, keyless version
• Supplied the Shaft profile from the replacement with tensile and yeild data for torsional analysis
• The new shaft was specified with machined steps at 0.05"
• Replaced bearing & Stator RTD's with Type J thermocouples
• Replaced 300W spave heater with 200W for Div 2 Atmoshere
• Special epxoy coated Cu bar Rotor and Tinned the leads for H2S service
• Supplied a 4160V, Nema 12 Motortronics Soft Starter
• All the above was performed and delivered in 10 working days for the date of PO to the compressor OEM.
• The overall costs were competitivedespite the fact that they were stock items

Continental Motors of New Jersey manufactured and delivered the following within 6 weeks of receipt of the order:

• Quantity 2
• 600 hps
• TEXP
• 7200 V
• 900rpm
• 1.15 SF
• Cast Iron Frames
• Standard Accessories (BTD's, STD's, S.H.)
• Precision Balance
• Copper Bar Rotor

CNRL, Primrose Site

CNRL had THIRTY new Siemens motors to be special modified for 4:1 CT VFD Turndown. No kits were available so we performed the following:

• Analysis of the Air flow required to cool the motor properly while maintaining the T-code for the Div 2 area.
• Design and special build a fan shroud extension with mounting solutions sensitive to fragile grill strength.
• Source and manufacture 30 of a special pitched non-sparking aluminium fans.
• With a reduced HP for weight considerations, supply 30 XP, 3ph, 575V, 56C frame, 1 HP Marathon Motors.
• Design and special build 30 non-sparking aluminium shaft extensions for the Blower motors.
• Match the Siemens paint, mount and test run all 30 kits on site.
• The CNRL Primrose site requires unique staff insurance levels and orientation due to the military location.
• All the above was performed and concluded within 6 weeks pf receipt of order.